|
|
1
|
| |
Art Silva has a Rikon mini lathe for sale for $210.
He says it is still in the box.
His email is artsil@verizon.net and phone is 610-298-3285.
|
|
2
|
| |
Craig Daymon is moving to Indianapolis and is selling some of his
larger shop items.
I hate to even say this, but it is only practical. I also should sell
my Powermatic 3520A. I have the indexing assembly installed as well as
a remote switch. The remote switch needs a new switch in the box, but
all the difficult wiring is done. This lathe has model B legs, which
means that all the add-on extensions available for the 3520B are
compatible. Basically, this means there are additional threaded
mounting positions for things like the 18" extension for outboard
turning that fastens about half way down the leg.
I have also built a ballast box that fits between the legs and
currently has about another 1000 pounds of sand in it.
$2000 or best offer.
Oneida 2HP Super Gorilla Cyclone system, 220V. Brand new, never
used. List is $1066.60 from Oneida. Asking $800 or best offer.
JET 3HP Anniversary Cabinet Table Saw, left tilt. $1000 or
best offer.
JET 14" Bandsaw with riser block. Iturra Bandrollers, New Urethane
tires, about 8 new blades from 3/4" to 1/4". 2 are specific turners
blades from Timberwolf (Suffolk Machinery). Extension table. Whole
package, $600 or best offer.
Lumber, not turning stock. 8/4 Popular, 4/4 Ash, 1/2" and 3/4"
plywood, and 3/4" MDF. Some full sheets, some cut into thirds. Most of
the lumber is 3-4 feet long. Prices negotiated.
Thanks,
Contact: Craig Daymon
(215) 343-6122
cwdaymon@verizon.net
1603 Rockcress Drive
Jamison, PA 18929
|
|
3
|
| |
SPRING CLEANING TOOL SALE!!
Hi folks - I'm getting a new lathe, and am taking this opportunity to
do some shop reorganization (small shop, too much stuff in it). I have
the following tools for sale:
1. Nova DVR Lathe (the original version, not the XP). Purchased new,
comes with outrigger unit and extra bed extension. In EXCELLENT
shape, over $2500 new, yours for $1450. You can also have the bench
it's mounted to if you'd like it for the cost of materials ($85).
2. Grizly 18" bandsaw, 2HP 220V with mobile base, extra blades and a
few accessories. Purchased from Ed Youtz a few years ago for making
bowl blanks (and hardly used; my chain sawing techniques have greatly
improved). $650
3. Advantage Machinery Jointer, 8" wide x 5' long bed. 3 phase with
converter, 2HP motor with double belts, extra set of knives and magna-
set. American made, 600+ pounds. $850.
4. Delta 30-Inch Unifence with leg set and table board. Brand new in
box. $225
NOTE: I'm looking for a good drill press and would be willing to trade/
work out a deal if you have one you don't need.
Please contact me if you have any questions.
Andy MacBride
610.653.9711 or andy.macbride@gmail.com.
Click Here to Dowload pdf Pictures
|
|
4
|
| |
12 x 24 shed with an 9 ft wide Garage door on one end and double dutch doors on the side. Two windows, and vents at both gable ends. Built with floor joists 12" on center so it would support heavy load. (Presently used to store a 17 foot boat and trailer). Wired with lights and receptacles. It has been on macadam up on blocks. (no dirt contact) Easy access through a parking lot to move. (You move) 12’6” total width. No special permit or escort required to move. Shed located at 501 Main St. Red Hill. $4400 new (plus tax).
$2500 and you move. Call 215-234-4816
|
|
5
|
| |
Delta Homecraft lathe 10" swing 42" bed length 4 speed step pulley
with stand #2 morse taper head & tial stock 1"-8 spindle threads.
Nova chuck new in box.
For more information Please contact:
Sean Skelonis
610-262-1040
|
|
6
|
| |
1. JET mini lathe, variable speed, with stand $180.00
2. E-Z Up canopy. 10 ft x 10 ft. Heavy duty top and four sides
that zip at corners. Used for 12 shows and in good condition. $95.00
Contact:
jwilliams@pil.net
215-862-2853
Thanks
John
|
|
7
|
| |
I have a Grizzly dust collector for sale. Purchased in 2002, used minimally, primarily for dust collection while sanding turnings. It is 220V (only), 2 hp, one 6" intake with adaptor to two 4" hose size. Is about 6 1/2 feet tall and rated by Grizzly at about 1500 cfm. Also have some assorted lengths of 4" flex hose, several 4' lengths of 4" metal pipe and a few connectors. Grizzly still sells this same unit but with an improved bag filter. It all goes for $100. I'm not abandoning dust collection, updating the system!
|
|
8
|
| |
I have a Dewalt 13" Two speed thickness planer for sale. I bought it a year ago and have NEVER used it. I also have the Dewalt Stand, and the indeed-outfeed tables (they are still in the plastic). Essentially, I assembled it with the stand, turned it on the make sure it was working, and there it has sat, getting dusty. I've never put a piece of wood through it. I would rather have a tormek grinder for my turning tools.
All together, the thickness planer, stand and infeed/outfeed tables sell for about 785 new. I'll sell the whole thing, dusty but never used, for 550.
Thanks,
Tom Dudra
tdudra@imshealth.com
|
|
9
|
| |
Phil Snyder has some tools for sale.
1. 14" Band Saw: Reliant Model DD-90, 1 HP. 115VAC. Mounted on
movable base with lock. Extra blades. Price $150.
Very good condition. Contact Phil Snyder, 856-231-9031
(Mt. Laurel, NJ), pasindigo@aol.com
Thanks for your help.
Phil
|
|
10
|
| |
Mark Edwards has a Craftman 14in. Band Saw.
He's asking $335 box never opened.
Retail is $499.99
Cell 610-554-5063
|
|
|
|
